VPC-A31-O1 Android EDLA OPS guide

Home

Was this article helpful?

Powering on your VPC-A31-O1

This article shows you how to switch over to the VPC's input source to power on and use your VPC-A31-O1.

On IFP devices

Depending on your device model, you may see a full screen input source menu or a pop-up input source window. No matter the menu, follow the instructions below.

Input settings menu with ViewBoard input source selected on the IFP52.Input settings menu with ViewBoard input source selected on the IFP33.

Change input source to the VPC by doing the following:

  • Method 1: With remote control
    1. Pressing INPUT/ on the remote control.
    2. Press ▼/▲ on the remote control to highlight the PC input source and then OK to select it.
  • Method 2: Through the input source menu
    1. Open the input source menu:
      1. Opening the toolbar and pressing the input source button . (Certain models.)
      2. Pressing the input source button  in the control bar on the home screen. (Certain models.)
    2. Press PC input source twice on the panel.

On CDE devices

Input source menu on a CDE device model. Note: The menu may appear differently depending on the device model.

On CDE device models, use the remote control to switch to the PC input source.

To change input source to the VPC,

  1. Press INPUT/ on the remote control.
  2. Press ▼/▲ on the remote control to highlight the PC input source.
  3. Press OK to select it.

Initial setup

When booting up the VPC-A31-O1 for the first time, a launch setup will initiate. In this process, set up a network, sign in to a primary Google account, and more. All steps are optional and can be configured at a later time.

  1. Set up accessibility settings, such as text size, zoom level, dictation, and TalkBack.
  2. Set up a network configuration to connect to the internet if no connection is automatically detected.
  3. Configure which Google services to permit.
  4. Set up a device pin. This will enable a lock screen and require a pin to use the A31-O1.

Learn more about all available settings.

myViewBoard Knowledge Base

Need additional help?

Check our other resources — we'll be happy to assist you.

Community Support